[互助]designer 中内部变量freq如何使用

designer中为电路赋值时，其中电阻阻值要考虑高频时趋肤效应，即阻值依赖于频率，阻值的计算公式中要包含系统频率，即系统内部变量freq, 这样的要求如何实现呢？直接把freq写进公式中总提示出错

图片:wrong.JPG

。该如何解决呢？查找到帮助，看不明白该如何用…… hH`yQGZ  
Frequency-Dependent Resistor Instance Netlist Syntax !Kd/ lDY  
The general form for a frequency-dependent resistor instance is: *+lnAxRa?  
v)4 kS  
Rxxxx n1 n2 [modelname] [R=]'freq-dependent-expr' J4xt!RW!  
hjaI&?w  
[[TC1=]val] [[TC2=]val] [M=val] [SCALE=val] ,HYz-sK.  
pA"pt~6  
n1 is the positive node and n2 is the negative node of the resistor. The current is assumed to flow from n1 through the resistor to n2. If a model card is provided for the resistor, the modelname is its name. The modelname is identified by matching it to the .MODEL statements in the netlist. +#,t  
jpT!di  
The frequency-dependent expression should be enclosed in single quotation marks. This expression calculates the resistance as a function of the token f, or as a function of any value with units Hz. The circuit frequency is available to the model each time the model equations are evaluated. The label R= is optional. The first unlabeled value after a modelname is taken to be the resistance value. OJQ7nChMm  
_N0x&9S$  
The syntax above shows the labels TC1= and TC2= as optional, but this option depends on the presence or absence of the resistance value, labeled or unlabeled: FL"IPX;
S  
2mVH*\D  
•  When both modelname and the resistance value are present but the resistance value does not have the R= label, the next two unlabeled values are taken to be TC1, then TC2. To specify a value for TC2, either a value .. 1 NLawi6  
dV.)+X7<  

未注册仅能浏览部分内容，查看全部内容及附件请先 登录 或 注册

哪位高人给指点一下？这个问题困了我好久了