[建模]CST MWS thin panel如何加载

貌似应该和HFSS里的layered impedance边界条件一样。CST好像只可以对实体进行材料属性设置，如何将材料属性中定义的thin panel属性，设置给物体表面啊？？ .. ;E]^7T  
ej&ZE n  

未注册仅能浏览部分内容，查看全部内容及附件请先 登录 或 注册

老帖子了，拿出来看看，同问，我是准备用在天线罩上面，但是简单的把天线罩设置为thin panel材料是行不通的，有警告：Thin panel material is not supported by transient solver. This material type will be treated as PEC.所以不知道怎么设置，望大神前来指导，我就不另开贴求助了

zypnuaa:老帖子了，拿出来看看，同问，我是准备用在天线罩上面，但是简单的把天线罩设置为thin panel材料是行不通的，有警告：Thin panel material is not supported by transient solver. This material type will be treated as PEC.所以不知道怎么设置，望大神前来指导，我就不另开贴求 .. (2015-07-07 17:55)  +e,c'.  

U&ytZ7iB  
按照CST MWS帮助文件《Material Overview (HF)》： npd:aGx  
UM/!dt}DnF  
Thin panel materials are only available for the time domain solvers on hexahedral mesh (i.e. transient solver and TLM solver) and the asymptotic solver. 2EOx],(|  
Z9.0#Jnu  
...... -xG6J.S  
TlowEh8r  
The transient solver allows only layer of normal type or wire mesh type with isotropic hole shape (i.e. circular or rectangular aligned). The rotation angle of each layer with respect to the others must be 0. Finally the layer structure must be symmetric with respect to the two ports (the local coordinate system is therefore not required). O0FUJGuTS  
'55G:r39  
...... gyb99c,)  
e#)NYcr6  
所以要看一下你自己的设置是否符合上面的要求。

hefang:按照CST MWS帮助文件《Material Overview (HF)》：
Thin panel materials are only available for the time domain solvers on hexahedral mesh (i.e. transient solver and TLM solver) and the asymptotic solver.
....... (2015-07-07 20:35)  y0d=  

OT 0c5x
 
说实话，没有例子，没看太懂……我再研究研究