[网格]CST MWS网格问题

我在仿真的时候有一个警告，警告为

图片:360截图20120920190641600.jpg

这是怎么回事呀？还有就是这个需要修改的地方在哪里呀？我怎么找 .. 5WO!u:!'  
L0UAS'hf  

未注册仅能浏览部分内容，查看全部内容及附件请先 登录 或 注册

我当时没有修改 直接计算的 应该是有些网格不联系 系统自动填充pec

CST MWS帮助文件《Mesh Problem Handling》：  LqU]&AAh  
*^QfTKN  
"xxx" mesh cells are represented in staircase mode and have been filled with PEC/PTC. YK_a37E{F  
"yyy" mesh faces are represented in staircase mode and have been filled with PEC/PTC. \|wVIi  
?hmj0i;XC  
Depending on the chosen hexahedral solver this warning might appear. It means that within a mesh cell or a mesh face a certain geometrical configuration cannot be used to run the solver correctly. Therefore these cells or cell faces are filled with PEC or PTC depending on the chosen problem type. However, in many cases these filled cells do not influence the simulation results significantly. The staircase based cells can be seen in the mesh view. Ag}>gbz~G  
cMtkdIO  
Solution: J *^|ojX  
Z7Mc.[C  
Please make sure that the mesh is not too coarse at locations where the staircase based cells appear. N/^r9Nu  
Depending on the chosen problem type, please activate the "Use TST cells" checkbox if provided in the "Mesh Properties - Hexahderal->Specials...->Advanced" dialog box. [}+ MZ  

zhuyeqing:我当时没有修改 直接计算的 应该是有些网格不联系 系统自动填充pec (2012-09-20 19:41)  =YR/X@&  

GGo n
A  
哦，知道了，谢谢

hefang:CST MWS帮助文件《Mesh Problem Handling》：
"xxx" mesh cells are represented in staircase mode and have been filled with PEC/PTC. %GQPiWu  
"yyy" mesh faces are represented in staircase mode and have been filled with PEC/PTC.
....... (2012-09-20 19:54)  9#L0Q%,*  

}t#uSz^  
谢谢，知道了