[新闻]CST STUDIO SUITE 2011 Servvice Pack 2已发布

离线hefang

本账号已冷冻，请勿发站内信或回帖，概不回复！

UID ：24731

注册：2009-01-19
登录：2025-05-09
发帖：9469
等级：荣誉管理员

0楼发表于: 2011-04-19 15:40:05

— 本帖被 hefang 从 CST 移动到本区(2011-05-02) —

关键词： CST PCB Cadence PEEC

Changes in Service Pack

Service Pack 2011.02

General / Environment
􀁺 Plot legend of 1D plots with many curves is faster now.
􀁺 Tool tip information for CST files larger than 2GB is displayed correctly in the 64bit Windows explorer.

Modeler / Structure Visualization
􀁺 Enabled transforming multiple wires for transformations that do not use the shape center.
􀁺 Brackets can now be used in filter operations for the curve selection and in the material dialog box.
􀁺 Improved error handling for subproject imports in case that the files to be imported are missing.
􀁺 Improved stability for face constraints in context of transform, copy, visualization, shape edit.
􀁺 Fixed problem in bending sheet on a spherical face.

EDA Import
􀁺 Consider local coordinate system correctly for PCB imports.
􀁺 Generate true component-pin names in ODB++ import.
􀁺 Cadence-Link: Fixed path problem with spaces.
􀁺 Fixed problem of missing wire-leads to discrete ports.
􀁺 Fixed saving of stackup data from within PCB import dialog.
􀁺 Silenced PCB import dialog box for Cadence - CST MWS batch runs.
􀁺 Introduced parameter restricting length of automatically created ports.
􀁺 Stability enhancements for CST-Cadence Simulation Plugin.

Distributed Computing (DC)
􀁺 Fixed problems with "Remote connection" of MainController and made display of log file more robust.
􀁺 Remote post processing did not handle table results correctly. Hexhedral (Hex) Mesh
􀁺 Fixed special TST setup problem for a MPI solver run.

CST MICROWAVE STUDIO - General
􀁺 Added M2070 GPU to list of supported GPUs. New Feature!
􀁺 Repaired numbering of rectangular arrays.
􀁺 Fix for distributed optimizations with parameters that changed to dependent but were previously used for optimization.
􀁺 Fixed merge of .pmi file in case of MPI and discrete ports.
􀁺 Normalization of farfield source S-parameters fixed.
􀁺 Touchstone-Export writes more digits for the frequency column if the registry-flag "ExtendedTouchstoneExport" is set.

CST MICROWAVE STUDIO - Transient Solver
􀁺 Repaired problem with Voltage and Current monitor and multiple ports.
􀁺 Fixed phase computation for voltage monitors, current monitors, lumped element and discrete ports.

CST MICROWAVE STUDIO - TLM Solver
􀁺 Fixed problem calculating Z/Y matrices.
􀁺 Error message for ports lying outside the calculation domain.

CST MICROWAVE STUDIO - Frequency Domain (FD) Solvers
􀁺 Repaired the algorithm used for counting the number of conductors.
􀁺 With Ignore losses specified in the frequency domain solver specials dialog for the new port mode solver, lossy metal is now treated as PEC.
􀁺 When continuing a frequency distributing solver run, some port header files for the new port solver were missing, e.g. with curved tetrahedral mesh.
􀁺 The frequency domain solver with curved tetrahedral elements terminated abnormally if a TE/TM/TEM mode type changed to "Hybrid" with frequency.
􀁺 The tetrahedral mesh is now deleted with the solver results when applying changes in the frequency domain solver dialog box.
􀁺 The frequency domain solver with frequency distributing computing might have calculated a monitor's frequency sample repeatedly when continued with a monitor not calculated before.
􀁺 In low memory situations, the Tet-FD solver sometimes displayed an error Could not restore a vector due to lack of memory.
􀁺 With variable order and adaptive mesh refinement, the Tet-FD solver in some cases stopped with an error message.
􀁺 Sensitivity analysis is now disabled and ignored for unit cells and curved mesh.
􀁺 With model simplification and dispersive materials, the Tet-FD solver sometimes terminated abnormally.
􀁺 Continuing the frequency distributed calculation with equidistant samples but no automatically chosen samples was not possible in SP1.
􀁺 Sensitivity information is now updated correctly when the mesher did not finish successfully.
􀁺 Fixed issue that sensitivity analysis could not be calculated because of missing data.

CST MICROWAVE STUDIO - Eigenmode Solver
􀁺 Fixed issue in external Q factor calculation if the AKS method was used.

CST MICROWAVE STUDIO - Integral Equation Solver
􀁺 Result cache is now also available after a distributed computing run.
􀁺 Repaired problem for wires with zero radius.
􀁺 Fixed problem with missing 3D results for farfield source excitations.
􀁺 Fixed problem for face ports when wires are present.

CST MICROWAVE STUDIO - Asymptotic Solver
􀁺 Added option to store and visualize rays. New Feature!

CST EM STUDIO Solvers
􀁺 Corrected editing behavior of current- and voltage path definitions if the path was renamed manually in the history list.

CST CABLE STUDIO
􀁺 Fixed problems during import of Nastran harness.
􀁺 AC radiation: Repaired moving of harness mesh representation.
􀁺 Repaired issue when deleting connectors.
􀁺 Fixed incorrect import of solid shields from older projects.
􀁺 Fixed problem of corrupting the project on "Save As" command.
􀁺 Made PSpice export of a long twisted pair cable more efficient.
􀁺 Handling of very complex 3D shapes in cable mesher accelerated.
􀁺 Co-simulation: Problems with shielded cables fixed for the uni- and bi-directional case.
􀁺 Floating windows did not show its content correctly.
􀁺 Let the parameter accuracy have some influence in the circle resolution of cable cross sections. New Feature!

CST PCB STUDIO
􀁺 2D TL mesher: Fixed BGA pin connection problem.
􀁺 Prevent PI-solver breakdown due to non-standard geometries.
􀁺 Prevented PI-solver breakdown due to components with a strange footprint.
􀁺 2D TL mesher enhanced concerning missing planes in cross sections.
􀁺 Floating windows did not show its content correctly.

CST DESIGN STUDIO
􀁺 Improved check for parameter dependency, if the CST DS tab is activated.
􀁺 Solved occasional performance problem of fast frequency sweep.
􀁺 Improve reliability of S-parameter task results for ill-conditioned circuits,
􀁺 Fixed wrong current of probed shorts in transient co-simulation.
􀁺 Repaired simulation problem for modal TL models with numerically fitted transfer impedances.
􀁺 Fixed rare simulation problem with waveguide modes below cut-off frequency.
􀁺 Fixed issue in parameter sweep when parameters are not synchronized before and synchronization is triggered due to parameter changes.
􀁺 Interpolation did not work on cached CST MWS results if some parameters are only CST DS dependent.
􀁺 Problem with accelerator keys resolved.
􀁺 Endless loop when selecting components via Ctrl+Arrow resolved.
􀁺 Repaired incomplete error or warning messages in ..

未注册仅能浏览部分内容，查看全部内容及附件请先登录或注册

附件:

Changes-in-ServicePacks.pdf (52 K) 下载次数:11

离线zhentiangon

UID ：40569

注册：2009-09-01
登录：2013-03-18
发帖：31
等级：仿真新人

1楼发表于: 2011-09-20 09:10:04

楼主好人，谢谢了！

离线whynot910

UID ：36184

注册：2009-06-28
登录：2025-09-30
发帖：17498
等级：RFEDA终级会员

2楼发表于: 2024-05-22 00:00:53

这个软件每年都要更新多次

发帖回复