[数据处理]有关CST MWS的Cross-Correlation仿真请教各位

在仿真天线的时候，需要求出两个信号的Cross-Correlation，根据cst的帮助文件可以得到这样的提示Calculates the Cross Correlation of two signals. In signal processing, cross-correlation is a measure of similarity of two waveforms as a function of a time-lag applied to one of them. This is also known as a sliding dot product or inner-product. p;c_<>ws-Y  
For signals in which the amplitude can vary, the Cross Correlation can first be normed. In this case, the Cross Correlation of two signals with identical shape will lead to a maximum correlation of 1. The position of the maximum is then the time shift between the two signal.。但是小弟怎么也求 .. '<{oYXZW3  
f:JYG]E&  

未注册仅能浏览部分内容，查看全部内容及附件请先 登录 或 注册

1.进入后处理模板，Results->Template Based Processing gf>5xf{M  
2.在第一个下拉菜单选择 General 1D， o(qmI/h  
3.第二个下拉菜单选择 Load 1D data file F,:VL*.5kJ  
4.Browse Tree  选择你需要求互相关的信号1 B9-=.2.WU  
5.重复2、3、4选择你需要求互相关的信号2 t,6=EK*3T  
6.在第二个下拉菜单选择 1D result from 1D result ~h.B\Sc]Q  
7.进入对话框1D result from 1D result，下拉选择cross correlation 1O
L~)X3  
8.下面出现另外两个下拉菜单，分别选择你之前添加的信号1和信号2 ugP R)tDfM  
9.OK 4v .6_ebL  
10.Evaluate