[互助]HFSS 求模型特性阻抗

gvR]"h  
}"TQ\v$  
HFSS 求特性阻抗时  激励面waveport的位置和大小  应该怎么设置才算正确啊？我发现不同大小，位置的激励面，最后得出的结果也不一样 v=@y7P1  
还有在扫描频率时  HFSS能不能仿很宽的频带  比如：从1-100 .. ^_ch%3}Im  
AaYH(2m-  

未注册仅能浏览部分内容，查看全部内容及附件请先 登录 或 注册

fast模式不适合超宽带，改成interpolating或者discrete，discrete最准但是太慢了

Microstrip Port Sizing Guidelines 8-+# !]  
Assume width of microstrip trace is  w H%n
/;DW  
Assume height of substrate dielectric is  h j6^.Q/{^  
Port Height Guidelines EUt2S_2P  
Between 6 h  and 10 h 4;~xRg;u&*  
Tend towards upper limit as dielectric -ioO8D&!  
constant drops and more fields exist in air @;9KP6d  
rather than substrate 0UpRSh)#  
Bottom edge of port coplanar with the upper 4?@5JpC9VA  
face of ground plane W:<2" &7  
(If real structure is enclosed lower than this @8J*vY =e  
guideline, model the real structure!) K @&c  
Port Width Guidelines dKPXs-5  
10 w,  for microstrip profiles with  w ≥ h #vK99S2  
5 w,  or on the order of 3 h  to 4 h , for microstrip a?Fz&BE  
profiles with  w < h

2楼上讲的是端口设置，论坛里有一份官方的说明文件，很详细