[建模]为什么导入的sat模型无法正常显示

请教大家一个问题，我在CST中导入了一个sat文件模型，在MWS工作室算完后，保存，关闭文件。在重新打开这个CST文档后却发现我的sat模型不见了，无法正常显示！！！重新计算了几次都不行，安装了两个版本也都是这种情况。请问 .. +`3ZH9  
}jgAV  

未注册仅能浏览部分内容，查看全部内容及附件请先 登录 或 注册

没有，回答完毕。 jXf-+;ZQ  
NQ!F`  
参考CST MWS帮助文件《CAD Data Import and Export Overview》和《Import SAT File》。 o++Hdvai  
iy9]Y5b   
Copy file to project jBbc$|O4SY  
6"(&l
K\^  
In general, the option 'Copy file to project' should be activated for the import. (k~c]N)v  
R?Qou!*
]  
When 'Copy file to project' is activated, the original import file will be copied to the Model/3D sub folder of the project. For the import, the copied file will be converted to a sat file, and will be saved to the Model/3D sub folder of the project, too. During a rebuild, the sat file is usually read except when the copied import file in the Model/3D sub folder is newer. Tw5BvB1  
}s[/b"%y  
When 'Copy file to project' is not activated, only the converted sat file will be saved to the project. During a rebuild, the sat file is usually read except when a newer file of the import exists. O"Q=66.CR  
}f}&|Vap  
This option is available for the following imports: SAT, STL, IGES, VDAFS, STEP, Autodesk Inventor, PROE (Part), CATIA4, CATIA5 (Catpart), Nastran, Microstripes, Conventor, Mecadtron, HFSS, DXF, GDSII, Gerber. FCPbp!q6  
qDW/8b\^  
Please note: For CATIA5 Catproduct files and ProE Assembly files this option is always deactivated, and these imports behave like explained above.  

建议你检查下单位设置 by {~gu  
*/1z=  
比如设置成了Hz,再设置个m单位,弄个open add space边界,就可能缩的很小看不到