[新闻]CST STUDIO SUITE 2015 Service Pack 1已发布

• Improved the creation of monitors when using wavelength scheme in project templates.
• Fixed several issues with global locking of simulation projects.

• Removed optimization settings dialog box for the Decap Tool.
• Auto-correct die orientation for single dies.

• Fixed color map dB scaling.
• Fixed 1D plotter performance problem for pasted 1D curves.

• Prevent checkout of 2 frontend license during DC optimization when port mode adaptation is active.
• Triangle-based surface loss calculation takes temperature-dependent materials into account.

• Output farfield and RCS probes defined using spherical coordinates as spherical vector components.
• Fixed solver failure for Cable Co-simulation models run via DC.

• Fixed possible crash with variable order in some cases of changing adaptation frequency.
• A single multipin port pin on two symmetry planes led to an error message.
• Field source excitation with curved mesh was inaccurate in some cases.
• Rotated field sources are now correctly considered.
• Fixed possible problems with adaptation and PML open boundaries (with fast ROM sweep).
• Fixed wrong field results, which occurred in some cases with fast ROM sweep.

• Added check for empty excitation list to prevent undefined behavior.
• Fixed radiated power calculation for simulations with nearfield source excitations.
• Fixed problems when thin wires touch infinite ground plane.
• Fixed error in simulation setup when nearfield source touches PEC like sheet.

• Prevent and warn if the computation of the inductances is applied to current wires.
• Fixed the extraction of state for zero excitations.
• Fixed possible heap overflow for open-boundaries.

• Fixed long assembly times in combination with motion and several other enhancements in 2D solver.
• Repaired the inductance computation for voltage-driven coils.
• Explicitly warn if iron losses are computed on conductive domains.
• Fixed the stacked material model.
• Fixed some mesh-related problems for some settings in the user interface.

• Fixed the error with temperature-dependent materials in SAM sequence context.

• Applied a fix for the import of hexahedral based predefined fields.

• New cable types included in built-in library: CAT5, USB, HDMI. New Feature!
• Improved robustness of history list handling.
• Drain wire positioning now works when the outside insulator is modified.
• Improved the handling of existing and empty bundles regarding autobundling.
• Handling of existing bundles with route from curve, consider existing bundle names.
• Perform a complete search for sub bundle names when renaming bundle elements.
• Consider initial unit for stranded wires in the corresponding editor.
• Improved robustness of cable library handling.

• Repaired wrong length-unit scaling of some PI solver input parameters.
• Stimulus column was turned inactive for some selected IBIS models.
• Voltage levels for IBIS models were wrong for some selected models.
• Pin groups & overlaps not optimized/cached and can result in long & redundant searches.
• Pin Grouping is sorting the table resulting in missing assignments.
• SI TD stimulus deactivated in case of open pin models. Solver ccd already handles this case.
• Fixed loss of current power supply pin selection when opening the corresponding dialog box for IR Drop.
• Improved the display of the 0D current/voltage views for IR Drop analysis.
• Initialization of IBIS dialog selected the wrong model resulting in unexpected simulation results.
• Deleting of net classes has been disabled.
• PI: Fixed that a vendor model that has a Touchstone file reference is treated as Spice sub-circuit model.

• Parameter View is not activated automatically if schematic is changed.
• Fixed abnormal termination or Time Domain representation for FD tasks feature, when IFT is applied.
• Improved stability of S-Parameter task by preconditioning of Schur complement.
.. ]Q.S Is  
jdVj FCl^#  

未注册仅能浏览部分内容，查看全部内容及附件请先 登录 或 注册

simon2013:英文官网怎么注册啊。。。。。。。。 (2015-03-09 17:09)  r}y[r}vk  

hefang:Licence文件里有。如果你没有licence，我就无能为力了……。 (2015-03-09 20:24) 
/jR8|sb