6576阅读
2回复

[互助]ADS2011仿真出现错误

UID ：98730

注册：2012-08-31
登录：2012-10-23
发帖：55
等级：仿真一级

0楼发表于: 2012-09-06 14:19:06

看英文的意思是我的Port没放到边缘地方，但我尝试了很多次，都没放到边缘处
仿真下来都错误了。

不知道谁有什么办法解决这个问题呢

--- WARNING -------------------------------------------------------------------

Pin P2 is positioned on more than one edge.
Move the pin away from any unintended edges.

-------------------------------------------------------------------------------
--- WARNING -------------------------------------------------------------------

Pin "P1" on mask 2 is not fully connected to a
conductive part of the design.

-------------------------------------------------------------------------------
--- WARNING -------------------------------------------------------------------

The port setup needed to be corrected:
Calibration will not be used for port "P1" (pin
"P1" is not on the edge between a conductive and
a nonconductive region).

-------------------------------------------------------------------------------
Generating mesh at 1.1 GHz...
--- ERROR ---------------------------------------------------------------------

At least one pin or bondwire end is not fully
connected to a conductive part of the design
(see details above).[/f ..

未注册仅能浏览部分内容，查看全部内容及附件请先登录或注册

离线俊婷砚

不怕苦不怕累

UID ：75840

注册：2011-04-18
登录：2025-07-18
发帖：267
等级：仿真三级

1楼发表于: 2012-11-03 17:14:24

你是在

come on

离线彩霞红漫天

UID ：105585

注册：2013-03-17
登录：2013-08-20
发帖：1
等级：旁观者

2楼发表于: 2013-03-23 22:38:44

亲们，知道为啥了没

发帖回复