[原创]大家来这里汇总HFSS使用中的出错问题及解决办法吧！！！

各位达人，有人看到这个问题？

112楼：你的软件设置的保存路径不对，重新设置。实在不行将软件卸了重装，路径设置保持默认就行

109楼：你的问题还是出现在内存上，你重新设置下虚拟内存（加大）

40楼的问题是怎么解决的（与100楼是一样的问题）？能不能说一下。因为我运行例子时一样会出这个问题，应该不是我模型或者激励的问题。如果是软件的问题，你是怎么解决的，谢谢

   用HFSS计算了一个正方物体的透射率和反射率，计算得到某段频率的内的S11和S21的mag值，但设定的pass大小不同结果不同，不知道哪个正确，并且相差特别的大，连相似都称不上，这是为什么？如果取的pass太大（30），中途会出错，提示（Error in two dimensional port data created from three dimensional mesh），不应是我的模型画的不对吧？紧急请教！ qCkC2Fy(  
  

25楼是计算机系统的问题，没办法的。重装芯xp系统就ok了，vista根本就不好用，尤其是vista系统加intel的cpu，就更不用说了

HFSS 10.0出现以下情况 oi]XSh[_s  
怎么办？

所用版本V10 cHt4L]n8n  
错误信息 #q K.AZi  
dipole (D:/新建文件夹/) JN:L%If  
  HFSSDesign2 @D=B5f@(o  
    [warning] Solution Setup 'Setup1': Given the specified frequency and model dimensions,  an extremely large mesh will be required to produce an accurate solution.  Your model and/or frequency units may be set incorrectly. (2:43 下午  十二月 15, 2008) pj<aMh  
    [warning] Solution Setup 'Setup1': Given the specified frequency and model dimensions,  an extremely large mesh will be required to produce an accurate solution.  Your model and/or frequency units may be set incorrectly. (2:45 下午  十二月 15, 2008) 6/#+#T  
    [error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (2:45 下午  十二月 15, 2008) c0Bqm  
    [error] Simulation completed with execution error on server: Local Machine. (2:45 下午  十二月 15, 2008) wm^1Fn--  
    [warning] Solution Setup 'Setup1': Given the specified frequency and model dimensions,  an extremely large mesh will be required to produce an accurate solution.  Your model and/or frequency units may be set incorrectly. (2:47 下午  十二月 15, 2008) KAXjvZN1  
    [warning] Solution Setup 'Setup1': Given the specified frequency and model dimensions,  an extremely large mesh will be required to produce an accurate solution.  Your model and/or frequency units may be set incorrectly. (2:47 下午  十二月 15, 2008) L){V(*K '  
    [error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (2:47 下午  十二月 15, 2008) @Co6$<  
    [error] Simulation completed with execution error on server: Local Machine. (2:47 下午  十二月 15, 2008)

pin_antenna (F:/HFSS学习/算法例子/工程/)  ZB|s/  
        [error] Field, Near Field, and Far Field reports cannot be created without specifying an appropriate setup geometry - polyline, sphere, or infinite sphere respectively.  Please create one before creating a report. (12:07 下午  十二月 17, 2008) h<)ceD<,  
在做高频探针天线时，所用的空气模型是长方体，在创建远场辐射图时，出现了这个错误，是为什么呢？

引用第99楼xinsy于2008-09-04 13:47发表的 : ZQym8iV/  
85楼，和你遇到同样的问题，请问要怎么解决，急呀。 zRmVV}b  
[error] Mesh generation has failed. Specific details may be found in 3D Modeler>Model Analysis>Show Analysis Dialog>Last Simulation Mesh.     H;NAS/OhS  
[error] Simulation completed with execution error on server: Local Machine.

E.;Hm;  
我遇到同样的问题~~~~求高人帮助