1211阅读
4回复

[互助]在ADS里导入了三极管的模型，但不知道输入输出阻抗？

UID ：7326

注册：2008-01-08
登录：2014-03-25
发帖：86
等级：仿真一级

0楼发表于: 2012-04-14 14:31:10

怎么才能知道三极管的输入输出阻抗？

***************************************************************
*    Infineon    Technologies    AG
*    GUMMEL-POON    MODEL    IN    SPICE    2G6    SYNTAX
*    VALID    UP    TO    8    GHZ
*    >>>    BFP540ESD    <<<
*    (C)    2008    Infineon    Technologies    AG
*    Version 0.9        August    2008
***************************************************************
* - Please use the global SPICE parameter TEMP to set the junction
*   temperature of this device in your circuit to get correct DC
*   simulation results.
* - TEMP is calculated by TEMP=TA+P*(RthJS+RthSA). The junction
*   temperature TEMP is the sum of the ambient temperature TA and
*   the temperature increment caused by the dissipated power
*   P=VCE*IC (IC collector current, VCE collector-emitter voltage).
* - RthJS is the thermal resistance between the junction and the
*   soldering point. RthJS for this device is 290 K/W. RthSA is the
*   thermal resistance of the PCB, from the soldering point to the
*   ambient. For determination of RthSA please refer to Infineon's
*   Application Note "Thermal Resistance Calculation" AN077.
* - The model has been verified in the junction temperature range
*   0癈 to +125癈.
* - TNOM=25 癈 is the nominal ambient temperature.
*   Please do not change this value.
****************************************************************
.OPTION TNOM=25, GMIN= 1.00e-12
*BFP540ESD C B E
.SUBCKT BFP540ESD 1 2 3

CBEPAR 22 33 5.041E-014
CBCPAR 22 11 3E-014
CCEPAR 11 33  1.034E-014
LB    22 2 1.13807E-009
LE   33 3 3.15933E-010
LC   11 1  6.15933E-010
CBEPCK 2 3  3.51534E-015
CBCPCK 2 1  1.3896E-019
CCEPCK 1 3  6.83524E-015
Q1 11 22 33 4 M_BFP540ESD

.MODEL     M_BFP540ESD    NPN(
+    IS    =    6.79E-017
+    BF    =    205.5
+    NF    =    1
+    VAF    =    46.19
+    IKF    =    0.5029
+    ISE    =    3.946E-014
+    NE    =    2
+    BR    =    4.66
+    NR    =    1
+    VAR    =    1.843
+    IKR    =    0.1924
+    ISC    =    3.85E-015
+    NC    =    1.5
+    RB    =    4.363
+    IRB    =    0
+    RBM    =    2.234
+    RE    =    0.1699
+    RC    =    2.484
+    XTB    =    -0.17
+    EG    =    1.11
+    XTI    =    2.4
+    CJE    =    5.337E-013
+    VJE    =    0.8642
+    MJE    =    0.5135
+    TF    =    3.106E-012
+    XTF    =    18.02
+    VTF    =    3.248
+    ITF    =    0.8641
+    PTF    =    0.1
+    CJC    =    1.974E-013
+    VJC    =    0.6468
+    MJC    =    0.2175
+    XCJC    =    0.7031
+    TR    =    4.163E ..

未注册仅能浏览部分内容，查看全部内容及附件请先登录或注册

离线dcx3291777

UID ：83785

注册：2011-10-09
登录：2013-03-21
发帖：88
等级：仿真二级

1楼发表于: 2012-04-16 14:35:20

做S参数仿真，S参数仿真面板里有个测试输入阻抗的原件Z-IN 插入仿真即可

共2条评分

azn2004	技术分 +1	积极参与论坛交流，欢迎继续参与本贴交流！	2012-04-16
azn2004	rf币 +5	积极参与论坛交流，欢迎继续参与本贴交流！	2012-04-16