1326阅读
2回复

[已解决]ADS仿真噪声系数时遇到个问题

UID ：59081

注册：2010-05-09
登录：2020-12-22
发帖：52
等级：仿真一级

0楼发表于: 2012-02-29 21:13:17

Warning detected by hpeesofsim during SP analysis `SP1'.
   The simulation temperature (25.0 C) is not the same as the IEEE standard noise temperature (290 K or 16.85 C) in the noise analysis `SP1'.
   If the simulation temperature is not equal to the IEEE standard temperature, then the loss and the noise figure will not agree for a passive circuit.
   The `Temp' parameter on the Options item can be set to 16.85 C to eliminate this warning message. *r)/Vx`S

未注册仅能浏览部分内容，查看全部内容及附件请先登录或注册

离线azn2004

UID ：49441

注册：2009-12-22
登录：2015-12-18
发帖：304
等级：禁止发言

1楼发表于: 2012-03-01 11:45:39

用户被禁言,该主题自动屏蔽!

共2条评分

hefang	技术分 +1	积极参与讨论+技术分论坛感谢您的参与	2012-03-01
hefang	rf币 +10	积极参与讨论+技术分论坛感谢您的参与	2012-03-01

离线marui928

UID ：59081

注册：2010-05-09
登录：2020-12-22
发帖：52
等级：仿真一级

2楼发表于: 2012-03-01 14:09:27

谢谢

发帖回复