[互助]ADS中EM仿真

[upload=1]我在CADENCE中导出PCB信号线（ADS文件）后，在ADS LAYOUT界面导入ALLEGRO文件后出现WARNING：如下： jyPY]r  
pmAir:  
[upload=1][upload=1][upload=1][upload=1][upload=1]some of the layers that need to[upload=1] have layer bindings removed are defined in these read-only libraries:ads_standard_layers K /h9x9^  
these libraries will not be change 2 @g'3M  
后面进行EM仿真却出现错误： -b-P
vw4  
Analysis "Solve" (M111220204403) of design PCI_AD0_lib:PCI_AD0:layout failed.（其中PCI_AD0是从ALLEGRO重摄 .. iq`y  
5gWn{[[e)y  

未注册仅能浏览部分内容，查看全部内容及附件请先 登录 或 注册