[互助]LNA EM仿真遇到的问题

Simulation / Synthesis Messages ]]8^j='P
'  
sH /08Z  
Warning detected by hpeesofsim during TRAN analysis `SP1'. J:oAzBFpA  
    COMPONENT `X4_LNA_schematic_13_1': K5EU?J&  
       Simulator uses frequency lower than frequency range of Momentum model. The S-parameters are extrapolated. &M*f4PeXb  
Warning detected by hpeesofsim during TRAN analysis `SP1'. eD?f|b
if  
    COMPONENT `X4_LNA_schematic_13_1': :XeRc"m<  
       The model for the Layout Component is not found in the ModelDatabase, a new model is generated for the requested parameter values. )|j?aVqZ  
Warning detected by hpeesofsim during TRAN analysis `SP1'. q@Oe}  
    COMPONENT `X4_LNA_schematic_13_1': (V9 ;  
       The model for the Layout Component is reused from the ModelDatabase. <U~at+M  
Warning detected by hpeesofsim during SP analysis `SP1'. ;)rXQm  
    The simulation temperature (25.0 C) is not the same as the IEEE standard ,8Q&X~$rY  
    noise temperature (290 K or 16.85 C) in the noise analysis `SP1'. #D|n6[Y'.t  
    If the simulation temperature is not equal to the IEEE standard temperature, i4H,Ggb  
    then the loss and the noise figure will not agree for a passive circuit. ;cp,d~mrf  
    The `Temp' parameter on the Options item can be set to 16.85 C to J ` KyS  
    eliminate thi .. go B'C  
0*XCAnJ^_  

未注册仅能浏览部分内容，查看全部内容及附件请先 登录 或 注册

把工程发上来看看