[待解决]Urgent on simulation of L-probe feed antenna

L-probe fed_Rect patch_Ant.rar (1534 K) 下载次数:17 I am a new learner of IE3D. When simulating a L-probe feed patch antenna from a journal paper, its results are different from those shown in that paper. Would you mind helping me to solve it? The paper about the antenna is also attached in .. m,)Re8W-  
inR8m 4c]P  

未注册仅能浏览部分内容，查看全部内容及附件请先 登录 或 注册

Pls help me......

base on, you can assume your ground plane is infinite, because finite ground plane analysis and set are very complex, and simulated time is long, AGOK%[[Ws  
your feed set is right, is different ports set. gY;N>Yq,C  
I suggest you should first draw the radiator, and the L-type structure(ground plane is infinite), feed to simulate. vjbot^W9  

attached is my simulated results, the result seems some different. however, it is resonable.as you can see,i  changed some about its feeding part,   ,$G89jSM  
  so i suggest you can define infinite ground,  and keep the correct feeding part which is the same as paper. then i think you can get correct result.   #p[=iP
  
let me see if you can finish that.

if you can finish that.

Thanks a lot

have you solved your problem?

Thanks, but still under solving

if you have any results, please tell me, i am looking forward to that. thanks

you have any results