[原创]Ansoft HFSS 11.1.1

lz能不能上传一个11的包啊 急需哦

HFSS 11.2 now!

习惯那种版本就好了

哇塞 新版本的说

/~1+i'7V.,  
rq{$,/6.  
不知好不好用

HFSS 11.2和HFSS 11.1.1用起来差不多 ,只是多了以下的几点功能: ?upM>69{  
Version 11.2 Enhancements and Bug Fixes h![#;>(  
============================================= +"(jjxJm  
HFSS is now able to export surface and volume losses in .xml file format for linking to zX~MC?,W1  
an ANSYS Mechanical v12 thermal analysis. yVc(`,tZ(  
t5zKW _J7  
DXF files can now be imported with .tech layer mapping files. +V+a4lU14  
d3Rw!slIq  
ANSft00084239 - Users can now run a non-graphical batchsolve of an analysis that DJir{ \F  
                requires a datalink between designs.   5IN(|B0  
fnY.ao1-s[  
BHw, 4#F1;  
Version 11.1.3 Bug Fixes 
:]c3|J  
======================== }
%z  
ANSft00083110 - Data table reports will now load more efficiently. 1}37Q&2  
ANSft00083445 - Port field lines now honor the calibration line defined on the port in M;NX:mX9  
                cases where the mesh is copied from another solution. r/sNrB1U"y  
ANSft00083190 - Expressions for excitation phase that do not contain units will no longer sGb{9.WK  
        be assigned a constant value in degrees after saving and closing the =EIkD9u  
        project. G`zm@QL  
ANSft00082977 - Triangle nodes could inadvertently be reordered during adaptive mesh |3%8&@ho  
        refinement, subsequently triggering a mesh failure.  This issue has been ^(<f/C)i  
        addressed. iUwzs&frd  
ANSft00082947 - The Linear Antenna incident wave excitation is now valid for all antenna ]~%6JJN7  
        lengths. 2(nlJ7R  
ANSft00083074 - Corrections have been made to the electric and magnetic Hertzian-Dipole I|J/F}@p  
ANSft00083456   incident wave formulas. >MK98(F  
B:
QHwzd
 
         BD-AI  
Q^I\cAIB  
Version 11.1.2 Enhancements and Bug Fixes nd(S3rct&  
========================================= -DCbko  
DataLink: V,9cl,z+  
ANSft00081142 - A checkbox option "Use Excitations from Source Design" has been added to r
bQR,Nf2x  
                the near and far-field incident wave datalink setups under the External _wOt39e&  
                Field Link Configuration tab.  If you select this option, excitation values 
0ksa  
                defined in the source design will be used for the analysis. H:G1BZjq  
ANSft00080800 - HFSS will no longer crash if Ansoft Designer launches it in iconified mode Q &t<Y^B  
                during a datalink analysis. Nluoqoac  
ANSft00081545 - Users will no longer be able to close a dynamically linked HFSS project fX)#=c|5  
                while the HFSS Dynamic Link panel is open in the Ansoft Designer desktop. 1sCR4L:+  
ANSft00081941 - The speed at which excitations are pushed from Designer to HFSS has been {PmZ9  
                improved when reports are defined in the HFSS design. &0f,~ /%Z  
ANSft00082694 - Source values will now be computed correctly when ports are deembedded and %bfZn9_m  
                Ansoft Designer is used to push the excitations. "mNq&$  
=mGez )T5\  
Solving: \?N2=jsu$  
ANSft00075941 - HFSS solving capability has been improved at very high frequencies (ie.THz). ??T#QQ
 
ANSft00082209 - This patch corrects a failure in the double-precision matrix solver that d %#b:(,  
                occurred in some large analyses. "]iB6  
ANSft00082131 - An overflow error could occur in solutions that incorporated layered |)81
Lz  
                impedance computations.  This issue has been addressed.   j7c3(*Pl  
y?:.;%!E  
Modeling: Ru~j,|0r4  
ANSft00081377 - The "Thicken Sheet" and "Sweep Face Along Normal" modeler functions are ty`DJO=Omj  
                now included in the UserDefinedPrimitiveStructures.h header file. g1o8._f.  
ANSft00081023 - The GetModelBoundingBox script command will now return the correct values N&pCx&  
                for the maximum and minimum X,Y,Z coordinates of all geometries. %IRi1EmN8  
'\GbmD^F  
Post Processing: J$!iq|  
ANSft00080820 - This patch addresses a desktop crash that occurred when the user would D0q":WvE  
                attempt to delete an output variable that respresented an invalid eigenmode K@#L)VT!  
                quantity. km40qO@3  
ANSft00080601 - Far field computations have been changed to accurately determine the ERt{H3eCcJ  
                radiated field pattern at theta = 90deg (at the horizon) for antenna devices 4e1Y/ Xq`  
                that exist above ground planes of low conductivity. }T$p)"  
ANSft00082702 - HFSS will now correctly compute radiation patterns for antenna devices that Faf&U%]*`  
                exist in a non free-space medium. :c[L3rJl  
aATA9V  
Desktop: _~ &iq1  
ANSft00079550 - HFSS would briefly hang every two minutes if a license file in the admin Yrn)VV[)h  
                directory pointed to a non-existent server.  This issue has been fixed.  

V11有许多毛病，比如突然死机，数据全丢，画扫频方向图容易死机等！

我一台电脑同时装了hfss11和hfss10，结果直接崩溃了。连开机都开不了，郁闷郁闷啊

不会啊,我试过hfss11和hfss10一起运行都没有问题.  

最新版已经没什么很大的问题了.