[原创]Ansoft HFSS 11.1.1

lz能不能上传一个11的包啊 急需哦

HFSS 11.2 now!

习惯那种版本就好了

哇塞 新版本的说

>MvDVPi~+  
AoI/n4T^  
不知好不好用

HFSS 11.2和HFSS 11.1.1用起来差不多 ,只是多了以下的几点功能: /Dj=iBO  
Version 11.2 Enhancements and Bug Fixes fk x \=  
============================================= '5|h)Q5  
HFSS is now able to export surface and volume losses in .xml file format for linking to  #c66)  
an ANSYS Mechanical v12 thermal analysis. k<\$Oo
OZ  
jyZWVL:_  
DXF files can now be imported with .tech layer mapping files. &Ob!4+v/GP  
LMAE)]N  
ANSft00084239 - Users can now run a non-graphical batchsolve of an analysis that iB& 4>+N+  
                requires a datalink between designs.   vTx2E6  
wLOB}ZMT  
] A+?EE2/  
Version 11.1.3 Bug Fixes H,u<|UMM_  
======================== u!W0P6   
ANSft00083110 - Data table reports will now load more efficiently. Rw:*'1  
ANSft00083445 - Port field lines now honor the calibration line defined on the port in -u
8NF_{c  
                cases where the mesh is copied from another solution. C .~+*"Vw  
ANSft00083190 - Expressions for excitation phase that do not contain units will no longer vG"=h%  
        be assigned a constant value in degrees after saving and closing the LpqO{#ZG  
        project. tyqT  
ANSft00082977 - Triangle nodes could inadvertently be reordered during adaptive mesh SF<c0bR9  
        refinement, subsequently triggering a mesh failure.  This issue has been +P`*kj-P\  
        addressed. _c_[C*T]  
ANSft00082947 - The Linear Antenna incident wave excitation is now valid for all antenna 7w6cwHrL@  
        lengths. 9uA>N  
ANSft00083074 - Corrections have been made to the electric and magnetic Hertzian-Dipole Ls] g  
ANSft00083456   incident wave formulas. I\$X/t +dH  
[S>2ASj  
         J\M>33zu  
20nP/e  
Version 11.1.2 Enhancements and Bug Fixes &H`jL4S  
========================================= j+,d^!  
DataLink:  N#a$t&  
ANSft00081142 - A checkbox option "Use Excitations from Source Design" has been added to b7p@Dn?E  
                the near and far-field incident wave datalink setups under the External x}"uZ$g  
                Field Link Configuration tab.  If you select this option, excitation values -3=#u_  
                defined in the source design will be used for the analysis. 3 C<L  
ANSft00080800 - HFSS will no longer crash if Ansoft Designer launches it in iconified mode  q;][5  
                during a datalink analysis. = < oBgD0k  
ANSft00081545 - Users will no longer be able to close a dynamically linked HFSS project xM&Wgei]10  
                while the HFSS Dynamic Link panel is open in the Ansoft Designer desktop. b
KN@j'M  
ANSft00081941 - The speed at which excitations are pushed from Designer to HFSS has been /VN f{p  
                improved when reports are defined in the HFSS design. j4uvS!  
ANSft00082694 - Source values will now be computed correctly when ports are deembedded and CyXRi}W.  
                Ansoft Designer is used to push the excitations. K8UP,f2  
v63"^%LX  
Solving: zp%Cr.)$  
ANSft00075941 - HFSS solving capability has been improved at very high frequencies (ie.THz). EKsT~SS  
ANSft00082209 - This patch corrects a failure in the double-precision matrix solver that 1NgCw\  
                occurred in some large analyses. 0p}D(m2B  
ANSft00082131 - An overflow error could occur in solutions that incorporated layered m1Mt#@,$  
                impedance computations.  This issue has been addressed.   
&RnTzqv  
5jgR4a*_v  
Modeling: W1|0Yd ;P  
ANSft00081377 - The "Thicken Sheet" and "Sweep Face Along Normal" modeler functions are &b%zQ4%d-`  
                now included in the UserDefinedPrimitiveStructures.h header file. Dw<bn<e-  
ANSft00081023 - The GetModelBoundingBox script command will now return the correct values +2&@x=xy  
                for the maximum and minimum X,Y,Z coordinates of all geometries. a+Kj1ix  
X6@WwM~qz  
Post Processing: KQg]0y d  
ANSft00080820 - This patch addresses a desktop crash that occurred when the user would ;CPr]avY  
                attempt to delete an output variable that respresented an invalid eigenmode P<a)25be/  
                quantity. mSb#Nn6W  
ANSft00080601 - Far field computations have been changed to accurately determine the :i.{  
                radiated field pattern at theta = 90deg (at the horizon) for antenna devices Pn>Xbe  
                that exist above ground planes of low conductivity. ^Uf]Q$uCjE  
ANSft00082702 - HFSS will now correctly compute radiation patterns for antenna devices that qfMo7e@6*  
                exist in a non free-space medium. f>UXD
 
iCHOv{p.  
Desktop: hUp.tK:X7o  
ANSft00079550 - HFSS would briefly hang every two minutes if a license file in the admin L"4mL,  
                directory pointed to a non-existent server.  This issue has been fixed.  

V11有许多毛病，比如突然死机，数据全丢，画扫频方向图容易死机等！

我一台电脑同时装了hfss11和hfss10，结果直接崩溃了。连开机都开不了，郁闷郁闷啊

不会啊,我试过hfss11和hfss10一起运行都没有问题.  

最新版已经没什么很大的问题了.